Description
Optimized for Compound, Recurve & Barebow Shooting
Unlike barrel-tapered shafts, the Apex features a true parallel aluminum-carbon structure with a strengthened tail section. This design provides:
- Greater tuning forgiveness
A cleaner launch and more predictable reaction, even with imperfect execution. - Recurve-friendly dynamic behavior
The stiffened rear section and consistent ID allow recurve archers—especially those with lighter draw weights—to use softer spines while maintaining stable flight and clean clearance. - Barebow consistency
Parallel geometry keeps node positions predictable across different crawl distances, improving vertical consistency.
High-Density 3.2mm ID A/C Construction — Long-Range Stability
Apex features a 3.2mm inner diameter with a dense aluminum-carbon wall design, giving the shaft:
- Strong resistance to wind drift
- Better down-range energy retention
- A slim external profile (OD varies by spine)
- Enhanced durability in tough target materials
This makes Apex an excellent choice for 50m compound, 70m recurve, and outdoor barebow competition.
Nano OD Precision & Toray 40T Carbon
With Nano OD precision diameter control and high-modulus Toray 40T carbon layered over a 7075-T6 aluminum core, Apex delivers:
- Excellent spine uniformity
- Fast and consistent recovery
- Outstanding strength-to-weight efficiency
- Superior structural integrity
Benefits of a Full Parallel Profile
A consistent profile from end to end provides:
- Even energy distribution
- Highly predictable tuning behavior
- Cleaner riser and arrow-rest clearance
- More stable grouping across form variations
Long-Range Forgiveness
Apex’s optimized mass-to-spine ratio results in:
- Flat arrow trajectories
- Tight outdoor groupings, even in shifting wind
- Repeatable precision shot after shot
Specifications
- Spine sizes: 325, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 900, 1000
- Straightness: ±0.001″
- Weight tolerance: ±1 gr
- Material: Toray 40T high-modulus carbon + aluminum core, built with Nano OD precision technology
- Construction: Aluminum-carbon parallel profile
- Pack: 12 shafts per pack
- Components: Compatible with Zone points and pin systems
Points, pins, and nocks sold separately
| SPINE | Shaft Length | Outer Diameter | GPI | Inner Diameter |
| 325 | 33″ | 5.35 | 10.5 | 3.2mm |
| 350 | 32″ | 5.3mm | 9.9 | 3.2mm |
| 380 | 32″ | 5.25mm | 9.5 | 3.2mm |
| 410 | 32″ | 5.25mm | 8.9 | 3.2mm |
| 450 | 32″ | 5.1mm | 8.6 | 3.2mm |
| 500 | 32″ | 5.0mm | 8.2 | 3.2mm |
| 550 | 32″ | 4.9mm | 7.7 | 3.2mm |
| 600 | 32″ | 4.8mm | 7.4 | 3.2mm |
| 650 | 32″ | 4.7mm | 6.9 | 3.2mm |
| 700 | 32″ | 4.6mm | 6.7 | 3.2mm |
| 750 | 32″ | 4.6mm | 6.5 | 3.2mm |
| 800 | 32″ | 4.5mm | 6.3 | 3.2mm |
| 900 | 32″ | 4.4mm | 5.9 | 3.2mm |
| 1000 | 32″ | 4.3mm | 4.7 | 3.2mm |
Reviews
There are no reviews yet.